SP 313DNw V, Setup Manual, Page: 12 / 40

0
1. Checking the IP Address Settings
Confirm the network environment you want to use. Perform the following procedure using a computer on the network to which the
printer will be connected. The following procedure uses Windows as an example.
Click the [Start] menu.
Enter "cmd" in the [Search programs and files] field, and then press the [Enter] key.
The command prompt appears.
Enter "ipconfig /all", and then press the [Enter] key.
The details about the network environment appear.
1
2
CVW601
1. DHCP Enabled
"Yes" is displayed if the addresses on the screen were assigned by DHCP. The network settings can be automatically config-
ured.
"No" is displayed if the addresses on the screen were not assigned by DHCP.
2. IP address, subnet mask, and default gateway
The IP address, subnet mask, and default gateway that have been assigned to the computer are displayed.
For manual configuration, use the same values as displayed here.
To manually specify the setting using Ethernet connection, make a note of the checked IP address.
2. Printing the Test Page
While holding down the [Job Reset] key, turn the machine on.
After the Power indicator lights and the alarm indicator (
ᴿ
) starts flashing, release the key.
CVW
Printing the test page.
•