manualshive.com logo in svg

SP 313DNw V, Setup Manual, Page: 26 / 40

Share
Download
SP 313DNw V Setup Manual Download Page 26

 Select your printer, and then click [OK].
 If the printer information appears after a while, the connection was established successfully.

DPH154

If nothing appears on the screen, repeat this procedure.

 The network settings are complete.

If it is necessary to specify the subnet mask, gateway, DNS server, or proxy server, see page  "How to Specify the Subnet, Gate-
way, DNS Server, and Proxy Server".

IPv6

A router with DHCP functionality or a DHCP server that is supported by IPv is required.

Automatic Configuration (DHCP Enabled)

 On the [Start] menu, click [All Programs].
 Click [Smart Organizing Monitor].
 Click [Smart Organizing Monitor Status].
 Click the [User Tools] tab.
 Click [Printer Configuration].
 Enter the access code, and then click [OK].

The default access code is "Admin". Enter "Admin" if it has not been changed. Case is significant.

 Click the [IPv6] tab.
 Select [Enable] in [IPv6 DHCP:], and the click [OK].
 Click [OK] when the dialog appear on the screen.
 Turn off the machine.
 Connect the machine to the router or the hub using the Ethernet cable.
 Turn on the machine.
 Click [Connect Printer].
 Click [Search Network Printer].

A list of printers currently connecting to the network appears.

 Select your printer, and then click [OK].
 If the printer information appears after a while, the connection is established successfully.

If nothing appears on the screen in about two minutes, repeat this procedure.

 The network settings are complete.

•

•

Summary of Contents for 313DNw V









































Reviews:

No comments