Page 13
HF-100 Users Guide
Software Con
fi
guration
Connecting to the HF-100 Update Port to Host PC
Connecting to the HF-100 Update Port to Host PC
Using a USB Mini-B to USB Type-A cable, connect the HF-100 to the Host Computer using the
HF-100’s “Update” port as shown below.
This connec on is only necessary when you want to run the con
fi
gura on so ware, HF-1xx
Applica on Se ngs, or when you plan to upload new
fi
rmware to the HF-100.
Installing the Software
Installing the Software
To install the HF-1xx Applica on Se ngs program, download and run the HF-1xx Applica on
Se ngs setup u lity from the SP Controls HF-100 product page. Once the installa on has
fi
n-
ished, you will see an HiFlex SP icon located on your desktop.
The so ware does not require a con nuous Internet connec on to operate this applica on
while on a job site. The Internet connec on is only required at installa on.
Note: The HF-1xx Applica on Se ng so ware is designed for use with Windows 10.
