Hardware Setup
SY-V6BE+
14
Step 2. CPU Fan Installation
Your Pentium
®
II processor kit comes with a cooling fan. Mount the
fan on the processor according to the instructions provided by the
manufacturer. The fan is a key component that will ensure system
stability. The fan prevents overheating, therefore prolonging the life
of your CPU.
Note: Remember to connect the fan to the appropriate power
source.
Step 3. SDRAM Memory Module Installation
This mainboard features 3 x DIMM Banks for 168-pin 3.3V
unbuffered and registered DIMM modules, providing support for up
to 768MB of main memory using DIMM modules from 8MB to
256MB. For 66MHz front side bus CPUs use 12ns or faster memory;
for 100MHz front side bus CPUs use 8ns (100MHz, PC100
compliant) memory.
Number of
Memory Modules
DIMM 1
DIMM 2
DIMM 3
1
1
st
2
2
nd
1
st
3
3
rd
2
nd
1
st
RAM Type
SDRAM
Memory Module
Size (MB)
8/16/32/64/128/256 Mbytes
Note: (1) 256 MB memory modules available on PC registered DIMM only.
(2) Always install memory modules in the order prescribed in this table.
(3) Do not install unbuffered and registered memory modules together.
Important: It is of prime importance that you install DIMM modules
as outlined in the table above in order to preserve signal integrity on
100MHz front side bus systems.
Summary of Contents for SY-V6BE+
Page 70: ...67 ...
