SOYO SY-V6BE+, User Manual

Page: 61 / 70

BIOS Setup Utility SY-V6BE+
58
3-8.1 IDE Device Controls
IDE Controls
Setting Description Note
Disabled Turn off the on-board
IDE
On-Chip PCI IDE
Ø
Primary
Ø
Secondary
Enabled Use the on-board IDE Default
Disabled IDE HDD Block Mode
Enabled Invokes multi-sector
transfer instead of one
sector per transfer. Not
all HDDs support this
function. Default
mode 0-4 0 is the slowest speed
4 is the fastest speed
IDE
Ø
Primary Master PIO
Ø
Primary Slave PIO
Ø
Secondary Master PIO
Ø
Secondary Slave PIO
Auto For better performance
and stability, we
suggest you use the
Auto setting to set the
HDD control timing. Default
Disabled
IDE
Ø
Primary Master UDMA
Ø
Primary Slave UDMA
Auto Select Auto to enable
Ultra DMA Mode
support. Default
3-8.2 Init Display Controls
lnit Display Controls
Setting Description Note
PCI Slot Default Init Display First
AGP
Choose which card –
AGP Display card or
PCI VGA card – to
initialize first.
3-8.3 Keyboard Controls
Keyboard Controls
Setting Description Note
12 MHz Default KBC input clock
8MHz,
16 MHz
Set the frequency for
the keyboard controller
input clock