Hardware Setup
SY-V6BE+
24
Note: When using the Power-On by Keyboard function,
please make sure the ATX power supply can take at least
take 720mA load on the 5V standby lead (5VSB) to meet
the standard ATX specification. Apart from the jumper
setting, you have to enter the CMOS setup and set the “ Power-On
by Keyboard” item in the SOYO COMBO Setup to “Password” or
Function key.
Step 14. SW1
SW1 is used to adjust AGP bus clock frequency depending on the
value of the front side bus (FSB) clock, also the setting of the SW1
determines the power up FSB clock which will remain effective until
the BIOS set the FSB clock to the CMOS setting.
SW1 Setting
Power up FSB Clock
AGP Clock
66MHz
AGP Clock
= FSB Clock
÷
1
100MHz
AGP Clock
= FSB Clock
÷
1.5
Note: The specification of maximum AGP bus Clock frequency is
66.6MHz.
Ø
Set SW1 to open when you use a FSB 100MHz CPU such as
350MHz, 400MHz, 450MHz , or 500MHz.
Ø
Set SW1 to close when you use a FSB 66MHz CPU such as
233MHz, 266MHz, 300MHz, 333MHz , or 366Mhz only for
Celeron.
Ø
Set SW1 to open when you use a FSB 66MHz but want to over
clock the FSB clock to 100MHz via the BIOS setting.
Summary of Contents for SY-V6BE+
Page 70: ...67 ...
