South NTS-960R, Operation Manual

Page: 66 / 214

59
⑩ Click [Next], line height LH
(LH) and horizontal distance (Off)
are displayed ※ 1) ～※ 3)
[Continue]
※
1) To finish the measurement, press [ESC].
※
2) To return to operation step
⑦
click [VD].
※
3) The NEXT key is used when the groud point G is not clear and you would like to check another
ground point G on the same vertical line.
7.5 LEAD MEASUREMENT (STORE NEZ)
In this program the coordinate for the next point is stored in memory after the
measurement is completed and accepted. The feature allows the user to occupy the
next move ‐ up point and use the previous occupied point for the backsight orientation.
When occupying the next point and backsighting the original occupied point, the
instrument will display the reverse angle for backsight orientation. If the occupied
coordinate is not preset, zero (0,0,0) or the previous preset coordinate will be used for
this program.
●
Set the coordinate value of instrument point P0 and set the direction angle from P0
toward the known point A.
Example
：