South NTS-960R, Operation Manual

Page: 133 / 214

126
③
Input Chainage and Offset, and
click [Enter].
Input station
information
[Enter]
④
Input instrument height and
code, then click “Align.” in “BS”
field. In the box input Chainage and
Offset and then click [Enter].
⑤
System calculates azimuth, click
[Set]. In the display shown as right
the Backsight azimuth is set.
[Setup]
⑥
The occupied point and
backsight azimuth is saved, and
then the alignment setout data
screen displays.
●
If you already have entered the occupied point and backsight point details from
either RECORD or SETOUT menus, you can skip these routines and go directly to the
set out POINTS,STRINGS,ALIGN or X ‐ SECTS.
13.1.2 Point Set Out