South NTS-960R, Operation Manual

Page: 134 / 214

127
After setting occupied point and backsight point, you can start point setting out
Example
：
OPERATIONAL STEPS KEY DISPLAY
①
In [Program] menu, click [Set
Out], in the prompt box click
[Points].
[Set Out]
[Point]
②
In the prompt dialog box input
the PT and Prism Height.
A ：
If the coordinates of the point
number exists in memory, system
will call up the point automatically.
B
：
If the coordinate data of the point is
not stored in memory, system will
recommends that to input setout
point.
C
：
The point to be set out can be
presaved in the project, then click
[List] to call up.
A ：
B ：
C ：