South-Tek Systems 70CPH Operation And Installation Manual Download Page 21

Page: 21 / 22

BrewBlast™ 70CPH O&M

South-Tek Systems

8.3

GAS LEAKS

As with any gas system, only use a spray bottle on non-electrical equipment to find leaks. Fix or replace leaking
fittings or old hose. Push-to-connect fittings will show bubbles and typically have up to a 5ccm acceptable leakage
rate. Contact your local provider/installer for help.

8.4

BLASTOFF™ -

LEAK DETECTION SYSTEM

(OPTIONAL FEATURE):

“There is an alarm sounding in the BrewBlast™ 70CPH and the control panel has a red BlastOff™ indicator light
illuminated on the side of the unit.” This means that it is equipped with the BlastOff™ - Leak Detection System
feature. If the buzzer is on, there may be a leak in one of the gas lines, regulators, or one of the keg couplings may
not be properly seated - causing gas leaks.

Note: Turn off this unit’s on/off power switch and check for leaks. If none are found, leave the unit turned off and
contact your Coffee System Technician. Once the leak has been fixed, turn the BrewBlast™ BrewBlast™ 70CPH
on/off rocker switch “On” to resume normal operation. By turning the system power off, then back on, this will reset
the BlastOff™ automatically.

APPENDIX A: WARRANTY

The

BrewBlast™ 70CPH System is warrantied against any defects in workmanship and materials for 12 months (or

1,000  hours)  from  the  date  of  shipment  from  South-Tek  Systems,  whichever  comes  first.  The  purchaser  has  the
liability  to  ensure  that  the  system  is  fully  inspected  upon  delivery  and  shall  contact  the  appropriate  shipping
company  to  make  any  claims  on  damaged  goods  due  to  transit  within  that  shipping  company’s  policies.  If  the
system  is  received  with  defects  that  are  not  due  to  shipping,  a  written  claim  should  be  submitted  to  South-Tek
Systems within 1 week of receiving the shipment. South-Tek Systems can deny all other claims at their discretion.

All warranty work shall be done at a South-Tek System facility or at a

BrewBlast™ 70CPH Authorized Service

Center. Only factory trained and authorized personnel are covered under warranty. Any part that is returned /
repaired / replaced under warranty may be remanufactured or changed to a different specific

ation at the factory’s

option. Any work performed by an unauthorized person/company or usage of non-factory parts, may void all
warranties to the product.

Any item not manufactured by South-Tek may carry its own warranty from its manufacturer and will be warrantied
by that manufacturer. All parts that need to be returned should be announced. Any item(s) that is returned to South-
Tek Systems without an RMA number (return authorization number) may be denied and returned to the sender.
Contact the factory for RMA #’s, prior to return shipment.

South-Tek  Systems  is  not  liable  for  damages  caused  by  normal  wear  and  tear,  water,  fire,  erosion,  corrosion,
explosion,  misuse,  oil/gas  vapors  or  unauthorized  modifications.  South-Tek  Systems  is  also  not  liable  for  any
losses  (including  CO

), damages, or cost of delays, including incidental or consequential damages. There are no

warranties or guarantees, expressed or implied, including the warranties of merchantability or fitness for a particular
purpose or use, other than those warranties expressed herein.

For Claims, contact South-Tek Systems LLC at:

tel (910) 332-4173 or toll free (888) 526-6284, fax (919) 847-0255

Email:

[email protected]

Or write to:

South-Tek Systems, Warranty Claims,

2940 Orville Wright Way,

Wilmington,

28405