South-Tek Systems 70CPH, Operation And Installation Manual

Page: 10 / 22

BrewBlast™ 70CPH O&M
South-Tek Systems
10
4.4
INSTALLATION (
BREWBLAST™ 70CPH
The BrewBlast
™ BrewBlast™ 70CPH is a turnkey system that can be mounted to the wall and connected to the
source. If the blender is included, the end user will have to connect the CO
2
to the BrewBlast
™ BrewBlast™
70CPH. Use caution when working with pressurized gas, making sure that all fittings and gas lines are installed
correctly. Always leak check every line before using the system.
Note: Line leaks will cause the BrewBlast
™ BrewBlast™ 70CPH to run excessively, shortening its life.
The BrewBlast
™ BrewBlast™ 70CPH is provided standard supplying 100% nitrogen, but a gas blend (of N
2
and
CO
2
) can be added as an option. These lines can be split individually to provide the correct gas and/or blended gas
to all of the beverage lines. Use only quality beverage tubing and fittings for all connections. Keep in mind the
temperature and pressure requirements when selecting them.
Always install a valve (on/off) on each individual line. This will help with troubleshooting the system. Never detach a
line with pressure on it before closing the valve; this could cause damage to the equipment or bodily injury. Also
avoid depressurizing the keg at all costs; this will negatively affect the coffee quality. Always shut off the valve and
remove the tap from the keg before changing or servicing the gas lines.
Item
#
STS Part # Description Qty
1
BB™
BrewBlast™
70CPH
BrewBlast
BrewBlast™ 70CPH Nitrogen
Generator 1
2 800-133 S-100/200 12" Mounting Bracket 1
3 800-134-B S-100/200/400 18" Mounting Bracket 1
4 800-129 Type 1 Lower Wall Mount Bracket 1
5 Misc 0.250" -20 x 0.750" Carriage Bolt 2
6 Misc 0.250" -20 x 0.750" Hex Cap Screw 2
7 Misc 0.250" Nylock Nut 4
8 Misc 0.250" Flat Washer 2