INTRODUCTION
-2-
For Machines Mfd Since 1/21
South Bend Tools
Model SB1493
I N T R O D U C T I O N
Controls & Components
Serious personal injury could occur if
you connect the machine to power before
completing the setup process. DO NOT
connect power until instructed to do so later
in this manual.
Untrained users have an increased risk
of seriously injuring themselves with this
machine. Do not operate this machine until
you have understood this entire manual and
received proper training.
Spindle:
Secures and spins buffing wheels
Accepts
5
/
8
" bore wheels of up to 12" diameter
Wheel Flanges:
Hold buffing wheel
Bushings:
Support flange to hold buffing wheel
securely
Digital Tachometer:
Displays spindle RPM
Variable-Speed Dial:
Rotates to adjust buffing
speed Variable-speed dial must be turned fully
counterclockwise for motor to start
ON/OFF Switch w/Disabling Key:
Turns motor
ON when moved up; turns motor OFF when
moved down When key is removed, switch is
disabled and machine cannot start
Spindle
ON/OFF Switch
w/Disabling Key
Variable-Speed
Dial
Digital Tachometer
Wheel Flanges
Bushings
