South Bend Tools
For Machines Mfd Since 1/21
Model SB1493
-15-
P R E P A R A T I O N
3
Connect machine to power supply
4
Move ON/OFF switch up to turn machine
ON (see Figure 8)
Note: Motor will not turn ON unless
variable-speed dial is turned all the way
counterclockwise.
5.
Verify motor operation by slowly turning
variable-speed dial clockwise Rotate
dial back and forth to test variable-speed
function
Motor should run smoothly and without
unusual vibrations or noises
6.
Turn variable-speed dial all the way
counterclockwise, then move ON/OFF switch
down to turn motor OFF
To test run machine:
1.
Clear
away all tools and objects used during
preparation and assembly
2.
Turn variable-speed dial all the way
counterclockwise and make sure ON/OFF
switch is in OFF position (see Figure 8)
Figure 8. Control panel components.
Variable-Speed
Dial
ON/OFF
Switch
7.
Remove key from toggle switch, as shown in
Figure 9
Figure 9. Removing key from toggle switch.
8
Try to start machine with switch
— If the machine does not start, the
toggle switch is working correctly
Congratulations! The Test Run is
complete
— If the machine does start (with the toggle
switch removed), immediately disconnect
power to the machine The toggle switch
safety feature is not working correctly
This safety feature must work properly
before proceeding with regular operations
Call Tech Support for help
