South bend SB1493, Owner'S Manual

Page: 30 / 32

-28-
For Machines Mfd Since 1/21
South Bend Tools
Model SB1493
P A R T S
Machine Labels
REF PART # DESCRIPTION REF PART # DESCRIPTION
101 PSB1493101 MACHINE ID LABEL 104 PSB1493104 TOUCH-UP PAINT, SB LIGHT BLUE
102 PSB1493102 MODEL NUMBER LABEL 105 PSB1493105 TOUCH-UP PAINT, SB DARK BLUE
103 PSB1493103 CONTROL PANEL LABEL
SB1493
101
102
103
Made in Taiwan to South Bend Specifications
WARNING! !
Serial No
MFG Date
Motor: 1-1/2 HP, 110V/220V, 60 Hz
Prewired Voltage: 110V
Full-Load: 7A at 110V, 3.5A at 220V
Motor Speed: 900–3600 RPM
Max. Wheel Diameter: 12"
Max. Wheel Thickness: 1-1/4"
Min. Wheel Thickness: 1/4"
Min. Wheel Speed Rating: 3600 RPM
Spindle Diameter: 5/8"
Weight: 55 lbs.
MODEL SB1493
1½ HP VARIABLE-SPEED
BUFFER
SINCE
1906
To reduce the risk of serious injury while using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Never place hands on a rotating buffing wheel.
5. Tie back long hair, roll up sleeves, and DO NOT wear loose
clothing, gloves, or jewelry.
6. Always hold workpiece firmly with both hands throughout
the buffing operation.
7. Disconnect power before changing wheels, adjusting, or
servicing.
8. Only use buffing wheels suitable for speed of buffer.
9. Make sure machine is properly adjusted and set up
correctly before starting motor.
10. Securely mount machine to stable surface or workbench
before starting.
11. Do not use workpiece with nails, loose knots, splinters, or
any condition that may cause the wheel to grab and throw
workpiece.
12. DO NOT expose to rain or use in wet locations.
13. DO NOT operate under influence of drugs or alcohol or
when tired or distracted.
14. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
104
105
The safety labels provided with your machine are used to make the operator aware of the
machine hazards and ways to prevent injury. The owner of this machine MUST maintain the
original location and readability of these safety labels. If any label is removed or becomes
unreadable, REPLACE that label before using the machine again. Contact South Bend Tools at
(360) 734-1540 or www.southbendtools.com to order new labels.