-52-
For Machines Mfd. Since 11/21
South Bend Tools
Model SB1125
P A R T S
Machine Labels
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
301 PSB1125301 MANUAL/ENTANGLEMENT/EYE LABEL
306 PSB1125306 ELECTRICITY LABEL
302 PSB1125302 DISCONNECT/PINCH LABEL
307 PSB1125307 TOUCH-UP PAINT, SB LIGHT BLUE
303 PSB1125303 SPINDLE SPEED NOTICE LABEL
308 PSB1125308 SOUTH BEND NAMEPLATE 62MM
304 PSB1125304 MACHINE ID LABEL
309 PSB1125309 MODEL NUMBER LABEL
305 PSB1125305 TOUCH-UP PAINT, SB DARK BLUE
Made in Taiwan to South Bend Specifications
WARNING!
!
Serial No:
MFG Date:
Power Req.: 220V, 1-Ph, 60 Hz, 15A
Motor: 1 HP, 220V, 3-Ph, 60 Hz
Full-Load Current Rating: 3.8A
Swing: 19-1/2"
Dist. Spindle-to-Column: 9-3/4"
Max. Dist. Spindle-to-Table: 25-5/16"
Max. Dist. Spindle-to-Base: 45"
Spindle Taper: MT#3
Spindle Travel: 5-1/2"
Number of Spindle Speeds:Variable
Spindle Speed Range: 50–2000 RPM
Drilling Capacity (Steel): 1-9/16"
Weight: 448 lbs.
MODEL SB1125
19-1/2" VARIABLE-SPEED
FLOOR DRILL PRESS
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses and a face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, servicing, or changing bits.
5. Avoid entanglement with spindle—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent unexpected rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for drill bits and workpiece material.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
SINCE
1906
SINCE
1906
SINCE
1906
Change spindle speed or rotation
direction ONLY when spindle is
completely stopped.
NOTICE
EYE INJURY
HAZARD
Always wear ANSI-
approved safety
glasses or a face
shield when using
this equipment.
WARNING!
!
WARNING!
!
ENTANGLEMENT
HAZARD
Remove or secure
loose clothing, hair
or jewelry to reduce
the risk of serious
injury or death.
Lore
m
INJURY HAZARD
Do not use machine
if you have not read
the manual. Visit
southbendlathe.com
or call 360-734-1540
to get a manual.
WARNING!
!
WARNING!
!
PINCHING
HAZARD
Always keep this
cover closed during
operation.
!
INJURY/SHOCK
HAZARD
To avoid shock or
accidental starting,
disconnect power
before adjusting or
servicing machine.
WARNING!
!
SB1125
301
302
303
304
305
306
307
308
309
306
The safety labels provided with your machine are used to make the operator aware of the
machine hazards and ways to prevent injury. The owner of this machine MUST maintain the
original location and readability of these safety labels. If any label is removed or becomes
unreadable, REPLACE that label before using the machine again. Contact South Bend Tools at
(360) 734-1540 or www.southbendtools.com to order new labels.