OPERATION
-22-
For Machines Mfd. Since 11/21
South Bend Tools
Model SB1125
O P E R A T I O N
Operation Overview
To complete a typical operation, the operator
does the following:
1.
Examines workpiece to make sure it is
suitable for drilling.
2.
Puts on required safety glasses and face
shield.
3.
Firmly secures workpiece to table using a
vise or T-slot clamps.
4.
Installs correct drill bit for operation.
5.
Adjusts table to correct height, then locks it
in place.
6.
Selects appropriate spindle speed according
to drilling speed chart located on Page 27
and adjusts drive belt to required pulley
sheaves.
7.
Connects machine to power, and starts
spindle rotation in proper direction for
cutting tool installed.
8.
Performs drilling operation.
9.
When finished, turns machine OFF and
disconnects it from power.
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
The purpose of this overview is to provide
the novice machine operator with a basic
understanding of how the machine is used during
operation, so they can more easily understand
the controls discussed later in this manual.
Note:
Due to the generic nature of this overview,
it is not intended to be an instructional guide for
performing actual machine operations. To learn
more about specifi c operations and machining
techniques, seek training from people experienced
with this type of machine, and do additional
research outside of this manual by reading "how-
to" books, trade magazines, or websites.
To reduce risk of eye or face
injury from flying chips,
always wear safety glasses
and a face shield when
operating this machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any projects.
Regardless of the content in this section,
South Bend Tools will not be held liable for
accidents caused by lack of training.
Keep hair, clothing, and jew-
elry away from moving parts
at all times. Entanglement
can result in death, ampu-
tation, or severe crushing
injuries!