ST2523 Series Operation Manual Ver1.2
52
7.1.8
Statistical Subsystem Commands
Statistical subsystem commands are used to count the measurement result or to set statistical funtion.
Command Tree:
The :STATIstics:STATe command sets the statistical function of primary parameter or secondary parameter to
ON or OFF.
Command syntax: : STATIstics:STATe <1,2,A or B>
Where,
1 (integer: 49)means A.
2 (integer: 50)means B.
A set the statistical function of primary parameter to ON
B set the statistical function of secondary parameter to ON
Query syntax: :STATIstics:STATe?
Response: <A or B> <NL^END>
For example: Query: :STATI:STAT?
Response: A
