9
ENGLISH
MHL-200 User’s manual
• 1pc fixture (5R lamp installed)
• 1pc User Manual
• 1pc Power Cable
• 1pc Signal Cable
If anything damaged during transit, notify the shipper immediately and keep
the packing material for inspection. Again, please save the carton and all
packing materials. If the fixture must be returned to manufacturer, it is impor-
tant that the fixture be returned in the original manufacturer box and packing.
2.2.2 Getting Started
Make sure there is enough space around the unit for proper ventilation and
prevent overheating; do not place the unit on top of hot devices such as
radiators or power amplifiers. The fixture is connected to mains through the
supplied cable. The product meets the required safety standards. Blown fuses
must be replaced with fuses of the same type and specification.
Make sure that all units must be properly grounded. For your safe-
ty, you should never remove any ground connector from electrical
devices or power cables, or make them inoperative.
Our products are subject to a process of continual further development. There-
fore modifications to the technical features remain subject to change without
further notice.
