18
ENGLISH
MHL-200 User’s manual
2. The main menu is accessed by pressing the [MODE] key, press this one
until the display shows message “R001”. Press [ENTER] to confirm.
3. Use the [UP] and [DOWN] keys to select the required address.
4. Press [ENTER] to confirm or press [MODE] to cancel.
5.2. CONTROLLING
After having addressed the lighting, you may now start operating these via
your lighting controller.
Note: After switching on, the lighting will automatically detect
whether DMX512 signal is received or not. If there is no signal recei-
ved at the DMX input, the display will not flash. This situation can
occur if:
• The three-pin XLR plug (cable with DMX signal from controller)
is not connected with the input of the moving head light.
• The controller is switched off or defective, if the cable or con-
nector is defective or the signal wires are swap in the input
connector.
Note: It’s necessary to insert the XLR termination plug (with 120
Ohm) in the link in order to ensure proper transmission on the DMX
data link.
6. TECHNICAL SPECIFICATIONS
Power Supply
230/240V AC, 50Hz
Fuse
T5A, 250V
Lamp
PHILIPS 5R 189W
Power consumption
500W
Optical System
High luminous efficiency parabolic mirror and double condenser system
All lenses are anti-reflection coated
Color
Fourteen different colors, interchangeable dichroic filters plus white,
color wheel with variable rotation speed
Gobo Rotation
Seventeen interchangeable gobos plus white, with high speed gobo
rotation effect
Strobe
Strobe frequency can be 15 times / second
Dimmer
Smooth dimmer from 0-100%
