Fuse
To prevent the risk of fire and damaging the unit, please use only of the rec-
ommended fuse type as described in the manual. Before replacing the fuse,
make sure the unit turned off and disconnected from the AC outlet.
Electrical Connection
Always disconnect from the power source before servicing or replacing fuse/
lamp and be sure to replace with same fuse/lamp size and type. Cut off power
before moving, repairing and cleaning the machine. Improper electrical wiring
may invalidate the product warranty. To avoid electric shock, all fixtures must
be connected to circuits with a suitable ground.
Do not power on and power off the fixture in a short time. Never frequently
open/close the lighting for reducing the life of the lamp. During the initial start-
up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
DMX connection
When use DMX controller, please make sure that there is no interference
sources (e.g. intercom, high frequency radio waves and radiation source).
Cleaning
Clean only with a dry cloth. Do not use any solvents such as benzol or alcohol.
Servicing
In case of failure or misfunction occurred, stop using the unit immediately.
Never try to repair the unit by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized
technical assistance center. Buy the same spare parts/components from ma-
nufacturer directly.
Any damage that cased by violating this manual is out of insurance, our com-
pany will not take the responsibility.
Warning
Never look directly into the light source, as sensitive persons may suffer an
epileptic shock (especially meat for epileptics)! Avoid direct eye exposure to
the light source while it is on.
Keep away children and amateurs!
6
ENGLISH
MHL-200 User’s manual
