CANVAS INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
Locking
Bolt
SLIPFITTER MOUNTING
1. The slipfitter mounting fits a 2 3/8” O.D.
Tenon
. Place the
slipfitter over the
Tenon
and secure the fixture with the
2
Set Screws
on the side of the slipfitter.
2. Remove 2 screws on side of
Round Cover Plate
.
Remove the
Round Cover Plate
and adjust the angle of
the fixture.
3. Loosen the
Locking Bolt
and swivel fixture to desired
angle.
4. Tighten the
Locking Bolt
and re-attach
Round Cover
Plate
.
Tenon
Set Screws
Round
Cover
Plate
Pivot Bolts
TRUNNION MOUNTING
CAUTION
:
UL and C-UL listed or CSA certified liquid
tight cord grip suitable for use with three conductor
type STW flexible cord shall be used for connection to a
wet location outlet box provided by others
.
To adjust the angle of the fixture using the trunnion:
1. Loosen the Pivot Bolts & angle locking screw.
2. Adjust fixture to desired angle.
3. Tighten
Pivot Bolts
& angle locking screw.
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
.
Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required
for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.
Close Up
Plugs (4)
If desired, cover the screw holes with the provided
Close
Up Plugs
(4) on the back cover as shown above. Tap lightly
into place.
ACCESSORIES
Chrome Wire Guard:
GDEZLED78W
Poly Shield:
GDEZLED78P
Lens & Door Replacement:
LCANVAS78 (bronze)
LCANVAS78W
(white)
