SoundGraph iMON Inside, User Manual

Page: 23 / 38

-23-
and ‘Rec’ button of the remote controller. The recording feature of Digital Camcoder
would be supported on the future update.
2. Using Remote Controller on the Multi-Median
Multi-Median could be controlled by iMON MM or iMON RSC remote controller. Especially, iMON
MM supports the special features of Multi-Median, so you can have more control power on
Multi-Median using iMON MM remote controller. Please refer to the remote controller button
usage on the below.
1) Up, Down, Left, Right buttons
These buttons are used for moving the focus on the Multi-Median. After moving the focus, then
you could select the icon that you want.
2) Enter button
‘Enter’ button is used to enter to the next view on the Multi-Median. After moving the focus to
the icon and folder that you want, push the ‘Enter’ button to enter to the next step.
3) Backspace button (‘ESC/Back button on the iMON MM remote controller)
‘Backspace’ button is used to go back to the previous view of the Multi-Median.
4) Select button
‘Select’ button is used to add or remove the media file to the current playlist in the Media
Folder/File View. Actually, this is not to delete the media file, but just exclude the file from the
playlist, so you can add the media file again to the playlist at any time you want.
5) Play button
‘Play’ button is used to ‘Play’ the media file. You can play the media file on the media preview if
you enter from the media file view using the ‘Enter’ button. You can use this button on the TV
view as a ‘Play’ command when you use the Time Shift feature.
Time shift feature will be
updated in the next update.
6) Pause button
‘Pause’ button is used to make ‘pause’ the current playing media. You can use this button on TV
view as a ‘pause’ command when you use the Time Shift feature.
Time shift feature will be
updated in the next update.
7) Prev. (CH-) button
“Prev.(CH-)’ button is used to make ‘previous’ command. This button is used to as ‘Channel
Down’ command at the TV view.
8) ‘Next (CH+) button
‘Next(CH+)’ button is used to make ‘next’. This button is used to as ‘Channel Up’ command at