-30-
activate and press Enter key.
3. Application Control
Now, once you have activated the program that you want using ‘Application Launcher’ and
‘Task Switcher’, you can use your registered remote controller button to control the program.
For example, if you want to control WinAmp, activate WinAmp and send the signal of the
remote controller. You can easily use the functions of WinAmp such as
Play/Pause/Stop/Next/Previous/Volume Control. The point you should remind is that the
command that would be performed is different depending on what program is active. Use ‘Task
Switcher’ when you activate the program without mouse or keyboard.
4. Using All Time Control Mode
Basically, iMON Manager can control the S/W that is active. So if you want to control ‘Windows
Media Player’ while ‘WinAMP’ is active, you have to activate ‘Windows Media Player’ first using
‘iMON Task Switcher. But you can use the “All-Time Control Mode” in order to control the
specific S/W regardless of the current active state of the application. Please refer to the
following in order to learn about the ‘All Time Control Mode’.
1) Assign ‘All Time Control Mode’ function to Remote Controller
In the case of iMON MM, there is a ‘All Time Control Mode’ button is located on the left side of
the down arrow key. But there is no ‘All Time Control Mode’ button on the iMON RSC. You need
to assign the ‘All Time Control Mode’ command to the iMON RSC remote controller.
2) Execute the ‘All Time Control’ Mode
If you push the button assigned to the ‘All Time Control Mode’, you may see the following
picture. The functions of the each screen button are as like follows.
Summary of Contents for iMON Inside
Page 1: ...iMON Multi Median Users Guide SoundGraph Inc...
Page 28: ...28...
