V1.22
Owners Manual SP20-Linex™
- 27 -
Step 2: Lifting the first cluster of cabinets
Rigging a complete array of SP20-LINEX can be significantly faster by lifting clusters of 3
cabinets at once for they are already connected in the flight-case during transport.
Lift the fly-frame at the lifting-point together with the first 3 cabinets out of the flight-case.
Step 3: Set the angles at the back of the cabinets
IMPORTANT: ALWAYS make sure the
quick release pins are well in place and
locked!
Remove the flight-case and lower the array to set the angles at the back of the cabinets.
The hole-pattern of the flying hardware allows angle-settings of 0, 0.25, 0.5, 1, 2, 3, 4, 5 and 6
degrees. See indications at back of cabinet for the corresponding hole-combination.
Connect the incoming audio-line to the top cabinet and link the audio links to the lower two
cabinets in the cluster.
