V1.22
Owners Manual SP20-Linex™
- 22 -
6.2
Rigging components
Integrated flying hardware
The integrated
S
asy-rig™ rigging hardware comprises front and rear connecting bars designed
for fast and easy connection of cabinets and the
S
asy-rig™ flying frame.
At the front of the cabinet a (retractable) connecting bar serves as a fixed rotation point (that can
be stored inside the aluminum rigging profile during transport).
At the rear of the cabinet a connecting/slide bar adjusts the angle settings and simply slides into
the enclosure hardware for easy transport and storage.
Always use the supplied quick release pins to fixate the
S
asy-rig™ connecting bars.
figure 6.2 SP20-LINEX enclosure with integrated flying hardware
Flying Frame
The
S
asy-rig™ flying frame is designed to fly up to 24 SP20-LINEX enclosures in a ‘dead-hang‘
set-up. SPArC™, specially designed line-array software, automatically calculates the
corresponding maximum number of cabinets for each situation submitted in the program and
signals when weight load limits are exceeded.
figure 6.3
S
asy-rig™
fly-frame with single-hoist-adapter and with tilt-bar
Depending on the desired setup the flying frame can be lifted with 1 hoist using the single-hoist-
adapter or 2 hoists, one at the lifting point and one at either of the tilting points.
The
S
asy-rig™ flying frame can also serve as a stand for ground-stacking the SP20-LINEX
system.
