Sound Devices PIX 220 User Manual And Technical Information Download

Page: 8 / 65

PIX 220i, 240i, 220, 240 User Guide and Technical Information

Sync Output BNC

Selectable genlock or wordclock output.

Conigured with Setup Menu option

Timecode/Sync



Sync Out

SDI Input BNC

HD-SDI video input. Accepts 3G-SDI,

HD-SDI, or SD-SDI signal with up to 8
channels of embedded audio.

SDI Output BNC

HD-SDI video output. Outputs 3G-SDI,

HD-SDI, or SD-SDI signal with up to 8
channels of embedded audio.

Right Panel Descriptions

Time Code I/O LEMO-5

Time code input and output on 5-pin

LEMO® connector.

LANC - 2.5 mm

2.5 mm female connector for a standard

LANC (Control-L) remote. Supports

record start and stop. Can also be conig

ured as a GPIO switch closure and used

to drive an LED for record tally.

See LANC

HDMI Output

Outputs HDMI video with up to 8 chan-
nels of embedded audio.

HDMI Input

Accepts HDMI (1.4a) signal with two
channels of embedded audio. The PIX

does not record or display content en-
coded with HDCP copy protection.

Keyboard - USB A

USB A female connector to connect a USB

keyboard. Keyboards with integrated

USB hubs are not compatible.

Control Knob

The Control Knob can be both turned and

pressed. Use the Control Knob to navi

gate between menu setings and to select

menu items. Pressing during playback

will toggle pause / play. Turning while

playback is paused will step forward or
backward by single frames.

Factory Programming Port

Factory use only. No user connection.

Summary of Contents for PIX 220


































































Search results

Summary of Contents for PIX 220

Reviews:

Related manuals for PIX 220

Brands by name

Popular brands

Sound Devices PIX 220, User Manual And Technical Information

Search results

Summary of Contents for PIX 220

Reviews:

Related manuals for PIX 220

Brands by name

Popular brands