Sound Devices MixPre-3M User Manual Download Page 15

Page: 15 / 69

Rev#

Screens & Navigation

The MixPre-3M has a sunlight-viewable, high-resolution, touch-screen-based

user interface. The touch screen interface displays the Home screen, Main Menu

screen, Channel screens and various other views.
For information on Channel screens, see

Accessing Channel Screen Settings

the

Input Channels

chapter.

There are several tap zones on the touch screen allowing you to easily interact

with the MixPre. As you become familiar with the user interface, changing set-

tings for inputs, outputs, recording and metering will become fast and intuitive.

Home Screen

The Home screen view is the default view that appears on the touch screen

when the device is powered up. The Home screen looks like this:

Status Bar

Q Icon & Cue Number

Music Icon

Time Counter

Punch Indicator

Remaining Time

SD Card Icon

Track Bank Selector

Meter View

Limiter Indicator

Track Labels

L/R Mix Meters

Power Status Icon

Menu Icon

Metronome

Summary of Contents for MixPre-3M






































































Search results

Summary of Contents for MixPre-3M

Reviews:

Related manuals for MixPre-3M

Brands by name

Popular brands

Sound Devices MixPre-3M, User Manual

Search results

Summary of Contents for MixPre-3M

Reviews:

Related manuals for MixPre-3M

Brands by name

Popular brands