Sound Devices MixPre-3M User Manual Download Page 57

Page: 57 / 69

Rev#

ler and are therefore disabled on the MixPre. Depending on the controller model,
these functions may include faders, trims, pans, reverb sends, and low cut filters.

Map User-Definable Buttons to Shortcuts

You can customize designated buttons/knobs on a controller to operate certain

functions on the MixPre. Functions that may be assigned include:

• Tone

• L/R Mute

• X1/X2 Mute

• Undo (Audio project only)

• Slate Mic (Audio project only)

• Metronome (Music project only)

• Add Q

• Record

• Stop

• Play

• Rewind

• Fast Fwd

• Shuttle (not all controllers)

To map controller buttons to perform MixPre functions:

1. Connect a controller.

2. On the MixPre, access Menu > * Shortcuts > Control Surface
3. Set any of the user-definable shortcut buttons to your required function.

Controller Interfaces

Each third-party controller has different capabilities. The following tables

Akai MidiMix Interface

Korg NanoKontrol 2 Interface

Korg NanoKontrol Studio Interface

Novation LaunchControl XL Interface

describe the functionality of each controller in Music and Audio projects:

The MixPre M-Series models do not support Audio projects.

Summary of Contents for MixPre-3M






































































Search results

Summary of Contents for MixPre-3M

Reviews:

Related manuals for MixPre-3M

Brands by name

Popular brands

Sound Devices MixPre-3M, User Manual

Search results

Summary of Contents for MixPre-3M

Reviews:

Related manuals for MixPre-3M

Brands by name

Popular brands