Sound Devices MixPre-3M User Manual Download Page 16

Page: 16 / 69

User Guide

You will find on the Home screen numerous items, such as:

ame

coN

escrIptIoN

Music Notes icon

Access the Music Control menu by touching this region of

the Home screen.

Current name

Displays name of current Music project.

Time counter

Indicates the current song position in hh:mm:ss:tenths.

All songs start at 00:00:00:0. Access the Music Control

menu by touching this region of the Home screen.

Q icon

Indicates current cue number: 01, 02, etc. A cue point

stores a song position so that you can easily locate to

that point—ideal for quickly jumping to the start of a

verse, chorus, or bridge.
When stopped, tap the Q icon to open the Cue Points

menu, which provides access to the Cue List and other

options.
While recording or during playback, tap the Q icon to

create a cue mark at the current location in the song.

Cue marks may be set as Play In, Record In, Record Out,

or Stop cue points via the Cue Points menu.
For more information, see

Working with Cue Points

Power Status Icons

(Green USB)

USB power source is ideal.

(Orange USB)

USB power source low. Brightness dimmed, USB-A port

disabled, 48v phantom on 2 channels only.

(Green Battery)

Healthy battery. Plan to change batteries when green

level drops to about ¼ full.

(Flashing Red

Battery)

Battery power is critically low. Change batteries.

Menu icon

Provides access to Menu screen.

Meter View

Displays the metering for the 12 tracks and stereo mix,

LR. White-outlined boxes surround meters to indicate

which tracks are being controlled by the Channel knobs.
Tap the L (left) horizontal meter to open Record sub-

menu and quickly adjust L&R Gain.
Switch track banks by touching different groups of me-

ters. See

Track Bank Selector

for more information.

Status bar

Cycle status information by touching:
• Song status: current bar position as well as Punch

and Metronome indicators,rendering status, and

remaining time: In idle or record, the remaining time

field displays remaining time on the SD card. In play,

the field displays remaining time to the end of the

song.

• Date & Time

Summary of Contents for MixPre-3M






































































Search results

Summary of Contents for MixPre-3M

Reviews:

Related manuals for MixPre-3M

Brands by name

Popular brands

Sound Devices MixPre-3M, User Manual

Search results

Summary of Contents for MixPre-3M

Reviews:

Related manuals for MixPre-3M

Brands by name

Popular brands