Sound Devices MixPre-3M User Manual Download Page 46

Page: 46 / 69

User Guide

USB

USB Audio Interface

The MixPre-3M has an integrated 5-in, 2-out core audio-compatible interface for

use with a Mac or PC computer.
For PC users, the MixPre-3M will appear as a 2x2 audio interface unless a spe-

cific ASIO

driver is installed. The latest ASIO driver, along with install instruc-

tions, is available for free at

www.sounddevices.com/support/downloads

. See

the MixPre-3M’s Downloads page.
To work with the USB audio from a host computer, it is necessary to route the

USB 1 - 4 sources appropriately. Should you want to mix the USB audio from

the host computer with live audio from the MixPre-3M’s inputs to the LR bus,

use the channel screen and select input source.

The MixPre-3M is capable of recording and streaming audio to a USB host si-

multaneously. It is also capable of recording the USB audio stream out of a

computer directly to its SD recorder. This is an amazingly useful feature for re-

cording any computer-based audio.

See the table below detailing the MixPre-3M’s channel to output assignments.

racks

usb o

utput

ssIgNmeNt

Track 1

USB stream 1

Track 2

USB stream 2

Track 3

USB stream 3

Track 4

USB stream 4

Track 5

USB stream 5

Summary of Contents for MixPre-3M






































































Search results

Summary of Contents for MixPre-3M

Reviews:

Related manuals for MixPre-3M

Brands by name

Popular brands

Sound Devices MixPre-3M, User Manual

Search results

Summary of Contents for MixPre-3M

Reviews:

Related manuals for MixPre-3M

Brands by name

Popular brands