To power a channel on or off:
1.
Press the Center button to enter the Selection Menu.
2.
Navigate to Menu>System>Power.
3.
Select the channels you want powered on.
a.
1 - Channel 1 is powered on, Channel 2 is off.
b.
1+2 - Both channels are powered on.
c.
2 - Channel 1 is off, Channel 2 is off.
d.
Off - Both channels are powered off. The A20-RX enters Standby mode.
4.
4. Channels that are turned off appear as ‘Ch Off’ in the single and dual channel screens.
Using shortcuts to power channels on or off:
●
To quickly power channel 1 on and off, press and hold the Left and Center button for two seconds.
●
To quickly power channel 2 on and off, press and hold the Right and Center button for two seconds.
Standby Mode
The A20-RX enters Standby mode when the receiver is powered and both channels are powered off.
Pressing any button displays the following.
Power on any channel to exit Standby mode using the power channel shortcut described above.
To power on both channels from Standby mode:
1.
Press and hold the Center button for two seconds.
2.
Release the Center button when the Channel Power LEDs turn blue.
A20-RX
User Guide
9
Summary of Contents for A20-RX
Page 1: ...A20 RX Two Channel True Diversity Receiver with SpectraBand Technology User Guide v6 00 ...
Page 33: ...24 no connection 25 Ground Ground connection A20 RX User Guide 33 ...
Page 36: ...using USB C power needs to be applied to the TA 4 or Hirose A20 RX User Guide 36 ...
Page 42: ...A20 RX User Guide 42 ...
