5.
Select the Send check box and click Send
To send a user group to A20-RX-SL receivers via A10-RACK:
1.
Start the SD-Utility application.
2.
Connect the A10-RACK to the computer’s USB port.
3.
Load the .ALUG file into SD-Utility.
4.
Select Send to RX. SD-Utility will detect and display all A10-RX and A20-RX receivers installed in the A10-RACK.
5.
Select the check boxes next to each receiver to which you want to send the User Group.
6.
Click Send.
To send a user group to A20-RX-SL receivers via 8-Series with SL-2:
1.
Using an SD card already formatted in an 8-Series Mixer-Recorder, save the .ALUG file to a formatted SD card.
2.
Insert the SD card into the 8-Series Mixer-Recorder.
3.
With the A20-RX-SL receiver(s) in the SL-2, power on the 8-Series Mixer-Recorder.
4.
Access the Receiver Overview screen by doing either of the following:
●
HP: Press and hold the METERS button, then press the Headphone encoder.
●
Press MENU, then use the Select knob to select SuperSlot>SL-2 Receiver Overview.
5.
Select a channel.
6.
Slide RTN/FAV switch right to select Options.
7.
Select User Groups > User > Load New.
8.
Select a user group to load from the User Group file.
Loading User Groups on A20-RX
While the SD card can have multiple .ALUG files, each with up to eight groups, only one user group at a time may be loaded to a
receiver.
A20-RX receivers can operate in one of two modes: User and Factory. In Factory mode, frequencies are manually dialed in, but in
User mode (when a user group is loaded), pre-set frequencies are dialed in by user name.
To set the receiver to User mode:
1.
Press the Center Menu button on the receiver.
2.
Select Settings > User Groups > User.
To dial in a specific User Group frequency:
1.
Press the Center Menu button on the receiver.
2.
Select Frequency
3.
Press the Left or Right button to select one of the user names. The frequency will appear along with the name.
While in User mode, no non-user group frequencies will be selectable. To revert back to manual frequency selection, set
mode to Factory (Menu > Settings > User Groups > Factory.)
A20-RX
User Guide
27
Summary of Contents for A20-RX
Page 1: ...A20 RX Two Channel True Diversity Receiver with SpectraBand Technology User Guide v6 00 ...
Page 33: ...24 no connection 25 Ground Ground connection A20 RX User Guide 33 ...
Page 36: ...using USB C power needs to be applied to the TA 4 or Hirose A20 RX User Guide 36 ...
Page 42: ...A20 RX User Guide 42 ...
