Audio Output and Control
The A20-RX outputs either analog line level or AES3 digital audio. This global setting applies to both channel outputs.
Analog Output
When set to analog in the Selection Menu the A20-RX outputs low-impedance, balanced line level audio. It is designed to connect to
balanced or unbalanced line level inputs. To unbalance the output, float pin-3.
AES Digital Output
When set to AES output in the Selection Menu the A20-RX outputs two-channel AES3 at 24-bit, 44.1 kHz. Channel 1 output appears
at AES left, channel 2 appears at AES right.
With the A20-RX-XLR the channel 1 XLR connector is used for AES3 output. The channel 2 XLR connector is not active when set to
AES output
.
SuperSlot
The A20-RX-SL (with A-SL accessory backplate) slots directly into the Sound Devices SL-2 for powering, audio, and communication
with the 8-Series Mixer-Recorders. Visit the respective 8-Series Mixer-Recorder User Guide for full details on 8-Series SuperSlot
support of the A20-RX.
The Sound Devices SL-6 does not support the frequency range of the A20-RX. When using an A20-RX-SL with SL-6 and Scorpio,
either limit the range to the UHF Band 470-694 MHz or attach antennas directly to the A20-RX-SL bypassing the SL-6 RF
distribution.
A20-RX
User Guide
23
Summary of Contents for A20-RX
Page 1: ...A20 RX Two Channel True Diversity Receiver with SpectraBand Technology User Guide v6 00 ...
Page 33: ...24 no connection 25 Ground Ground connection A20 RX User Guide 33 ...
Page 36: ...using USB C power needs to be applied to the TA 4 or Hirose A20 RX User Guide 36 ...
Page 42: ...A20 RX User Guide 42 ...
