FCC & ISED User Statement
This device complies with FCC and ISED RF exposure limits for general population / uncontrolled environments.
Cet appareil est conforme à la norme FCC et ISED les limites d’exposition pour la population générale / l’exposition incontrôlée
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna
●
Increase the separation between the equipment and receiver
●
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
●
Consult the dealer or an experienced radio/TV technician for help
Industry Canada Conformity
This device operates on a no-interference, no-protection basis. Should the user seek to obtain protection from other radio services
operating in the same TV bands, a radio licence is required. For further details, consult Innovation, Science and Economic
Development Canada’s Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Wireless Microphones in
the TV Bands.
This radio transmitter 22225-9295 has been approved by Innovation, Science and Economic Development Canada to operate with
the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain
greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
The transmitter is supplied with the above unique antenna types; to replace a lost, damaged or faulty antenna, please contact Sound
Devices, LLC.
Part
#
Manufacturer
Description
Maximum Gain
Impedance
1122
4
Sound Devices,
LLC
Antenna straight 470-548 MHz (140 mm / 5.51 “) +2.15 dBi
50 ohms
1122
5
Sound Devices,
LLC
Antenna straight 548-638 MHz (120 mm / 4.72 “) +2.15 dBi
50 ohms
This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including interference that may cause undesired operation of the device.
Conformité à Industrie Canada
Cet appareil opère selon un régime de non-brouillage et de non-protection. Si l’utilisateur veut obtenir une protection par rapport aux
autres services radio opérant sur les mêmes bandes TV, une licence radio est requise. Pour plus de détails, veuillez consulter le
circulaire de procédures client CPC-2-1-28 Délivrance de licenses sur une base volontaire pour les microphones sans
fils exempts de licence exploités dans les bandes de télévision, publié par Innovation, Sciences et Développement économique
Canada.
Ce transmetteur radio 22225-9295 a été approuvé par Innovation, Sciences et Développement économique Canada pour opérer
avec les types d’antennes listés ci-dessous, avec gain maximum permissible indiqué. Les types d’antennes non inclus dans cette
liste et dont le gain excède le gain maximum indiqué sur n’importe quel type listé ci-dessous sont strictement prohibés d’utilisation
avec cet appareil.
Ce transmetteur est fourni avec les types d’antenne unique ci-dessus; pour remplacer une antenne perdue, endommagée ou
défectueuse, veuillez contacter Sound Devices, LLC.
# Pièce
Manufacturier
Description
Gain Maximum
Impédance
A20-Mini
User Guide
42