Sound Devices 702 User Manual And Technical Information Download Page 66

Page: 66 / 78

702 User Guide and Technical Information

v. 2.67

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Setup Name

Setup Description

Setup Options

CF: Space

Shows the drive file system, total size, and

space remaining on connected CompactFlash

medium.

CF: Erase / Format

Formats installed CompactFlash medium
Caution, while various PC utilities are able to

recover files from re-formatted drives, once

formatted, old audio data is not accessible by

the 702.

CF: Empty Trash

Allows user to delete files previously sent to

the trash as well as false takes.

• Empty Trash

• Empty False Takes

• Empty both

EXHDD: Space

Shows the drive file system, total size, and

space remaining on connected Compact Flash

medium.

EXHDD: Erase / Format

Formats attached FireWire storage volume
Caution, while various PC utilities are able to

recover files from re-formatted drives, once

formatted, old audio data is not accessible by

the 702.

EXHDD: Empty Trash

Allows user to delete files previously sent to

the trash as well as false takes.

• Empty Trash

• Empty False Takes

• Empty both

Balance Cal

Calibrates the center position of the input 2

pot when used as the balance control for MS

recording.

Place balance control to center and press to select.

Power: Ext Low Batt Volt

Sets the warning voltage of the low battery

alert with an external power source. Internal

battery warning threshold is factory set.

10.0–18.0 VDC, 0.1 V steps

Power: Ext Power Function

Controls the behavior of the unit when power

is applied to the external DC jack.

Pin-3 (+) of the external DC input must be

wired in order for the External Power Func-

tions to operate.

• Do Nothing

• Power On Unit

• Power On and Start Record

• Power On/Off unit

• Power On/Off unit and Record

Power: Power-up Messages

Enables or disables the notifications that ap-

pear upon boot up (daily folder prompt, output

attenuation notice, and set time and date

message). Disabling these messages is useful

when using the External Power Functions to

power on and start recording and the Record

Start and Stop Timer.

• Disabled

• Enabled

Ext Keyboard: Assign

Enter to setup keyboard shortcuts when using

the CL-1 keyboard interface

Ext Keyboard: Language

Select the language of the keyboard attached

to the CL-1.

• English

• German

• French

CL-1: Re-program

The CL-1 has its own firmware which is

supplied from the 702. This utility updates the

CL-1 firmware.

CL-1: Logic Out Assign

Each logic output pin can be assigned to go

high when the unit is in the selected mode.

Logic input overrides logic output selection.

• Undefined

• Stop

• Play

• Pause

• Record

Info: Button Shortcuts

An informative menu showing the available

keyboard shortcuts.

Info: Version

Shows the hardware revision, serial number,

and firmware version of the unit.

Summary of Contents for 702















































































Search results

Summary of Contents for 702

Reviews:

Related manuals for 702

Brands by name

Popular brands

Sound Devices 702, User Manual And Technical Information

Search results

Summary of Contents for 702

Reviews:

Related manuals for 702

Brands by name

Popular brands