Sound Devices 702 User Manual And Technical Information Download Page 28

Page: 28 / 78

702 User Guide and Technical Information

v. 2.67

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Headphone Favorite Selection

If “

SELECTS FAVORITE MODE

” is selected from the choices above, pushing the Rotary Switch selects

the assigned “Headphone Favorite” source. This feature is helpful to quickly return to a selected

headphone monitoring selection while recording or playing. One of the available headphone selec-

tion can be selected as the headphone favorite.

Headphone Playback Mode

The user may select a headphone source for automatic selection upon playback. All headphone

source selections are available for Headphone Playback Mode, as well as “No Change”, which leaves

the headphone source set to the currently selected mode. Headphone Playback Mode is controlled in

the Setup Menu.

Headphone Warning Tones

The 702 can generate an audible beep, or warning “bell”, in the headphones when an error has oc-

curred. The specific error will be reported on the LCD. The output level of the warning bell is menu-

selectable from off to –12 dBFS in the Setup Menu.

Recording Start and Stop Bells

If the Setup Menu option

HP: RECORD/STOP BELL

is enabled, the 744T will generate beeps to alert

the user of the recorder’s current status. These beeps are only sent to the headphone monitor, these

beeps are not present in the recordings or at the analog outputs.

7-Series Status

HP: Bell

Recording

One 440 Hz beep

Paused (if using Rec: Record Pause) One 220 Hz beep
Stopped

Two 220 Hz beeps

Low Battery Warning

When either the attached battery or external power supply voltage reaches their low warning levels

(6.5 V for the attached Li-ion, 11.0 V or user-selectable for external) warning tones are played in

headphones. The warning tone is a three pop note of 880 Hz every 20 seconds.

If all warning tones are turned off, no tones are sent to headphones, including low battery warning

tones.

Metering and Display

The 702 features a 38-segment LED (2 x 19) signal level meter. The DSP-controlled meter provides

a selection of ballistics and lighting intensities. In addition, peak indicators on input channels show

overload activity.

Output Meter

0 dBFS track LEDs are programmable

as peak LEDs

(0 dBFS to

20 dBFS)

Summary of Contents for 702















































































Search results

Summary of Contents for 702

Reviews:

Related manuals for 702

Brands by name

Popular brands

Sound Devices 702, User Manual And Technical Information

Search results

Summary of Contents for 702

Reviews:

Related manuals for 702

Brands by name

Popular brands