Sound Devices 702, User Manual And Technical Information

Page: 65 / 78

702 User Guide and Technical Information
63
# Setup Name Setup Description Setup Options
56
LCD: Scrolling Direction
Defines the direction in which the Multi-Func-
tion Rotary Switch will navigate throughout
the 702.
• Normal
• Reverse
57 Meter: Ballistics Selects among five different meter ballistics
settings
• VU only
• Peak only
• Peak-hold only • Peak+VU
• Peak-hold + VU
58 Meter: Peak Threshold User-set level in dBFS where track peak
LED’s illuminate. 0 LED doubles as track peak
indicator.
0 to
-
20 dBFS (1 dB increments)
59 Meter: Stealth Mode Enables LEDs to toggle on and off with the
LCD backlight key.
• Off
• On
60
HP: Rotary Switch Function
Selects the functionality of the Rotary Switch’s
button when in record and playback.
• Disabled:
push makes no change to the headphone matrix.
• Selects Favorite Mode:
in record and playback modes, push will change
the headphone source immediately to the favorite
selected in HP: Favorite Mode.
• Playback/Monitor Drive Select
Selects the media source for file playback and record
monitoring
61 HP: Monitor Modes Select the sequence of the modes that appear
in the Headphone Source Display on the LCD.
Up to 20 source selections can be entered in any
order. See headphone monitor section in guide
for adjustment and Favorite Mode below for list of
headphone selections.
62 HP: Favorite Mode Selects the audio source monitored when the
Rotary Switch is pressed during recording or
playback.
Inputs 1,2
Tracks A,B
Monitor A,B
Input 1,1
Input 2,2
Track A,A
Track B,B
Monitor A,A
Monitor B,B
Inputs 1,2 (MS)
Tracks A,B (MS)
Tracks A,B (MS)
Inputs 1+2,1+2
Tracks A+B,A+B
63
HP: Playback Mode
Selects the audio source sent to headphones
upon playback.
• No change
• Same as options listed above
64 HP: Warning Bell Level Set the output level of the multi-function warn-
ing bell.
Off,
-
60 to –12 dBFS in 1 dB steps
65 HP: Rec/Stop Bell Alerts the user with one beep at the start of
recording and two beeps when the recording
is stopped
• Disabled
• Enabled
66 Tone: Level Set the output level of the reference tone
-
40 to 0 dBFS in 1 dB steps
67
Tone: Frequency
Allows the user to set the frequency of the
reference tone oscillator
100–10,000 Hz in 10 Hz steps
68 Tone: Mode Select the destination of the reference tone or
to disables it completely
• disabled
• to record tracks only
• to outputs only
• to record tracks and outputs
69 Tone: Record Lock Sets the Tone key to be either available or
locked while in Record Mode.
• Enabled While Recording
• Locked While Recording
70
Drive: Tests
Performs a speed test on the CompactFlash
media installed and external drives. Data
transfer speed is measured in KB/s.
Caution: Drive test will disable processing and mute
outputs for duration of test. Outputs will not return
until test is exited.