After selecting an Output (eg. Output2) and press the SET button you and can select using the
Encoder or Mute Volume parameter
If you select Mute and press SET, on the display you will see the following screen
the Eth led will be turned on because the system sends a message to DPA880T asking for the
current status of the Mute on the selected Output.
If the CP8 is not connected to the DPA880T or the ID is not correct then the display will show the
following message
and after 2 sec. The Eth led will turn off and the system will go back to the menu
If communication is successful, then the display will show the current status of the Mute
through Encoder is possible to change the status of the Mute from ON or OFF or vice versa in real-
time and the parameter will be updated on DPA880T
Press the Esc key to return to the start screen
If you selected Volume and press SET, on the display you will see the following screen
the Eth led will be turned on because the system sends a message to DPA880T asking for the
current status of the selected Output Volume.
If the CP8 is not connected to the DPA880T or the ID is not correct then the display will show the
Output 2
Volume
Output 2
Mute
Output 2
Mute
Volume [dB]
Step=0.1dB V=
Output 2
Mute
Mute
Mute =
Mute
Device not connected
Mute
Mute = On
Mute
Mute = Off
