Using Encoder to change the status of the Mute from ON to OFF or vice versa in real-time and the
parameter will be updated on DAP880T
Press the Esc key to return to the start screen
If you select Gain and press SET, on the display you will see the following screen
Using Encoder it is possible to change the value gain (gain varies between-30dB to 0dB) and in real-
time the parameter will be updated on DPA880T
...
...
Press the Esc key to return to the start screen
2.
SELECT ZONE
After pressing the SET button, via Encoder you can select between Mute or Volume
If you select Mute and press SET, on the display you will see the following screen
the Eth led will turn on because the system sends a message to DPA880T asking for the current
state of mute on the Zone selected.
If the CP8 is not connected to the DPA880T or the ID is not correct on then the display will appear
the following message
Input 2
Mute
Gain [dB] G= -10
Input 2
Gain
Zone 2
Mute
Zone 2
Volume
CP8 CTRL ZONE_
Zone Control
Gain [dB] G= -30 Gain [dB] G= -10
Gain [dB] G = 0
Mute
Mute =
