
© 2001-2018 SOTA Instruments Inc.
Page 7 of 9
|
www.sota.com
The Bio Tuner Model BT6pro Manual
CONDUCTIVE PADS OPTION
a. Clean the area behind the ears again.
b. Replace the Conductive Pads.
EAR CLIPS OPTION
a. Wet the conductive rubber of the Ear Clips again.
b. Apply conductive gel or aloe vera gel to the ear lobes.
c. Clean the Conductive Rubber Electrodes.
d. Replace the Conductive Rubber Electrodes.
2. With repeated use, the buzzing sensation may not be felt as much. The intensity
may be turned up if desired.
3. You may feel a sensation on one side more than the other.
4. In rare instances, some individuals may not feel the current.
TYPICAL USE
Length of Session:
One cycle is timed for approximately 20-minutes. One session
can be 20 to 40 minutes (1 to 2 cycles).
Information indicates that if used longer than 40 minutes per session, the benefits
may be reduced. The unit can be used for up to three 40-minute sessions per day—
space the sessions throughout the day.
Length of Use:
The unit should be used daily, at least 2 sessions per day, for a
minimum of 4 weeks or longer. After the benefits have been achieved, simply use the
unit as needed.
Intensity Level:
The intensity should always be set to a comfortable level. Be sure to
reduce the intensity before changing modes. After the new mode is selected, readjust
the intensity.
With Extended Use:
It is recommended to vary the Mode from time to time.
Sensitive Skin:
During the first weeks of use, the skin may become irritated when
using the Ear Clip Option. Over time, irritation usually decreases or disappears.
Apply a healing lotion after use if the ear lobes become red or irritated.
Drink plenty of water:
It’s important to drink enough water when using the unit.
Drinking ozonated water is especially helpful.
Stop Gradually:
Reduce the amount of time each day for the last week of use.