© 2001-2018 SOTA Instruments Inc.
Page 4 of 9
|
www.sota.com
The Bio Tuner Model BT6pro Manual
SUMMARY OF LIGHTS
GREEN
: Indicates the Bio Tuner is in operation and the current is flowing through the
Headset. Also indicates Modes 1 through 3.
RED: Indicates the battery is low and will soon need replacing. Also indicates Modes 4
through 6.
HOW TO USE THE BIO TUNER
1. Place the 9-Volt Alkaline battery in the unit.
a. On the back of the unit, slide off the battery cover.
b. Clip the battery connections in the battery compartment to the 9-Volt Alkaline
battery terminals.
c. Slide the 9-Volt Alkaline battery into the case and push down.
d. Slide the cover back onto the unit.
HEADSET OPTION
2. Clean the area behind each ear to eliminate skin oils. This
will allow for better conductivity.
a. Wet the cotton sleeves with water and place them over
the Headset electrodes.
b. Insert the Headset Cord into the jack on the unit.
c. Position the Headset electrodes in the hollow behind the
ears as in image 1.
CONDUCTIVE PADS OPTION
2. Clean the area behind each ear to eliminate skin oils. This
will allow for better conductivity.
a. Insert the Cord into the jack on the unit.
b. Attach one set of Conductive Pads to each connection on
the Cord.
c. Attach a Conductive Pad behind each ear lobe as in
image 2.
1
2