© 2001-2018 SOTA Instruments Inc.
Page 5 of 9
|
www.sota.com
The Bio Tuner Model BT6pro Manual
EAR CLIPS OPTION
2. Clean the ear lobes to eliminate skin oils. This will allow for
better conductivity.
a. Insert the pins on the cord into the Ear Clips.
b. Wet the conductive rubber on the Ear Clips with water or
conductive gel.
c. Place one Ear Clip on each ear lobe, positioning the Ear
Clip with the conductive rubber at the back of the ear lobe
and close to the jaw as in image 3.
TURNING THE UNIT ON
3. Turn the unit ON by turning the ON/OFF switch clockwise.
The GREEN
light on the end panel will begin to flash
alternately once every second, indicating the unit is in Mode 1. If the lights do not
come on, the battery may not be properly connected.
4. Gradually turn up the intensity to a comfortable level. The intensity should be
comfortable. See ‘How It Should Feel’ on page 6.
5. Place the unit in a pocket.
6. Change Modes by pushing the Mode Select button. The table below indicates how to
identify each Mode. For more information on the Modes, see ‘Output of Six Modes’
on page 8.
3
MODE
INDICATED BY
MODE 1
GREEN
light flashes once (1) per second.
MODE 2
GREEN
light flashes twice (2) times per second.
MODE 3
GREEN
light flashes three (3) times per second.
MODE 4
RED
light flashes once (1) per second.
MODE 5
RED
light flashes twice (2) times per second.
MODE 6
RED
light flashes three (3) times per second.