© 2001-2018 SOTA Instruments Inc.
Page 6 of 9
|
www.sota.com
The Bio Tuner Model BT6pro Manual
7. After the 20-minute timed session, the unit will automatically cycle into Sleep Mode
and both the GREEN and the RED
lights will stop flashing and come on steady.
8. While in Sleep Mode the battery is still being used.
a. To turn the unit OFF, rotate the ON/OFF switch counter clockwise until it clicks.
Do not force the ON/OFF switch past its natural stopping point.
b. To continue with another session, turn the unit ON again and choose your desired
Mode. Before starting a second timed cycle, wet the cotton sleeves again.
Notes:
Headset and Ear Clips:
The Headset and the Ear Clips may feel more comfortable
with the use of either conductive gel or aloe
vera gel rather than water. Over time, the
Ear Clips may lose their conductivity and
will need to be replaced.
Changing Modes:
When the Mode is
changed during a timed session, the timing
starts again for a new 20 minute session.
Care of Bio Tuner Cord and Ear Clips:
Occasionally, remove the conductive rubber
from the Ear Clips to clean in a mild soap
solution. Rinse thoroughly. If necessary,
gently wipe the metal pins of the Bio Tuner
Cord.
Low Battery Warning:
The RED light comes
on when the battery is low. This means the
battery will soon need to be replaced.
HOW IT SHOULD FEEL
1. The sensation is a pleasant buzzing. It is not necessary to turn the control up to an
uncomfortable level. If it feels prickly or unpleasant, check the following:
HEADSET OPTION
a. Wet the cotton sleeves again.
b. Apply conductive gel or aloe vera gel to the hollow behind the ears.