— Special Hours: The policy will apply during special hours (as defined on the Special
hours page).
— Custom times: If you select this option, you must set at least one custom time by
doing the following:
1. Set the start and end times by using the From and to time-selector controls.
You can set the times by clicking beside either the hour, minute, or meridian (AM
or PM) setting and scrolling with your mouse wheel until you get the time that you
want.
2. Select the days of the week check boxes for the days on which you want the
additional policy to apply.
3. Click Add to add the date and time setting to the list of custom times.
You can select multiple date and time settings, but the times that you select must
be chronological: the From time cannot follow the to time. For example, you
cannot set a time range ending at 12:00 AM, as this is treated as the beginning
of the day, not the end of the day, which is 11:59 PM.You can set up to 25 custom
times. All of the custom times that you set will be used.
Note: If you select Specified times, and Special hours is not available, this is because
you have not defined a special hours policy, or you have configured a special hours policy
and enabled it, but then disabled it.
3. Select the Turn on this policy for machines connecting from: check box and choose
anywhere, outside your network or inside your network. If you do not select this check
box, the policy will not be immediately enabled.
For more information on how users can connect from outside your network, see
on page 144.
4. Optionally, select the Automatically deactivate policy on check box, and set the Date and
Time on which you want the exception turned off.
You can set the times by clicking beside either the hour, minute, or meridian (AM or PM) setting
and scrolling with your mouse wheel until you get the time that you want.
5. Click Save to close the Additional Policy wizard and return to the Additional Policies page.
4.2.5 Configuring the Local Site List
The Configuration > Group Policy > Local Site List page allows you to view all of the URLs
that have been added to the list and to manage that list. URLs are added to the list to extend the
filtering provided by the Web Appliance to URLs not included in the Sophos site list or to override
the default filtering specified in the Sophos site list. The URLs listed in the Local Site List can
be edited to change their Tags, Risk class, or Site category, or they can be deleted from the
list.
For information on adding sites using the Local Site List Editor and on the use of tags, see
on page 99.
Sophos Web Appliance | Configuration | 97
