18
Front Panel
Chap
te
r 2
Name
s
an
d
F
u
nc
tio
n
s
o
f P
a
rts
c
INTERNAL (internal storage) button
This button selects internal storage (hard disk drives) as
the operation target media.
d
MEMORY button
This button selects an SxS memory card as the operation
target media.
e
Slot selection lamps
These light to indicate the selected memory card slot.
2
Memory card slots
a
Memory card slots
These two slots (A and B) can receive SxS memory cards
b
Eject buttons
To remove the SxS memory card from the slot, press the
eject button to release the lock, then press the button once
more. This makes the media come out of the slot partially
c
MEMORY ACCESS A/B lamps
Indicate the state of slots A and B
3
Audio level adjustment section
a
CH-1/ALL CH, CH-2 to CH-4 (audio level)
adjustment knobs
Depending on the setting of the VARIABLE switch, these
adjust the input audio or playback audio levels of channels
1 to 4.
You can adjust levels of channels 5 to 8 using the function
menu. For details, see “P3 AUDIO page” (page 46).
By the setting of setup menu item 131 AUDIO VOLUME,
you can enable the CH-1/ALL CH adjustment knob to
simultaneously adjust all eight channels. When this
simultaneous adjustment is enabled, the ALL CH indicator
lights.
b
VARIABLE (audio level adjustment selector)
switch
This selects whether input audio levels or playback audio
levels are adjusted by the CH-1/ALL CH and CH-2 to CH-
4 adjustment knobs for channels 1 to 4, or by the function
menu setting for channels 5 to 8.
REC:
Adjust the input audio levels. The playback audio
levels are fixed at their preset values.
PRESET:
The audio levels are fixed at their preset values.
PB:
Adjust the playback audio levels. The input audio
levels are fixed at their preset values.
It is not possible to adjust the audio levels of the recording
and playback ports simultaneously.
To set the audio level of each port separately, adjust one or
the other by using external audio equipment connected to
a REMOTE (9P) connector (R/P2 or P1).
1
Memory card slots
2
Eject buttons
3
MEMORY ACCESS A/B lamps
1
CH-1/ALL CH, CH-2 to CH-4 adjustment knobs
2
VARIABLE switch
Note
