44
External audio input jacks
A
: INPUT1 jack
B
: INPUT2 jack
Audio source switches
D
: INPUT1 (LINE/MIC/MIC+48V)
switch
F
: INPUT2 (LINE/MIC/MIC+48V)
switch
Audio source level controls
C
: ATT (INPUT1) switch
E
: ATT (INPUT2) switch
Recording channel switch
H
: REC CH SELECT (INPUT1) switch
Audio level controls
I
: AUTO/MAN (CH1) switch
J
: AUDIO LEVEL (CH1) dial
K
: AUTO/MAN (CH2) switch
L
: AUDIO LEVEL (CH2) dial
Wind noise switches
G
: LOW CUT (INPUT1) switch
M
: LOW CUT (INPUT2) switch
1
Select the audio input source.
Set the INPUT1/INPUT2 (LINE/MIC/
MIC+48V) switch (
D
or
F
) based on
the device connected to INPUT1 jack
A
/INPUT2 jack
B
.
b
Notes
• If the switch is set to MIC+48V and you connect
a device that is not compatible with +48V
power, it may damage the connected device.
Check the switch before connecting the device.
• To prevent unwanted noise when no audio
device is connected to the INPUT1 or INPUT2
jack, set the INPUT1/INPUT2 (LINE/MIC/
MIC+48V) switch (
D
or
F
) to LINE.
Connected device
Switch
position
External audio device
(such as mixer)
LINE
Dynamic microphone or
microphone with built-in
battery
MIC
+48V powered
(phantom powered)
microphone
MIC+48V
Audio setup (Continued)