Sony XDCAM PXW-X70 Operating Manual Download Page 22

Page: 22 / 132

To remove the battery pack

Turn the power off, then slide the BATT
release lever to release the battery.

On the battery pack

• Turn the power off before changing the battery

pack.

• The CHG lamp flashes during charging, or the

Battery Info (p. 72) will not be correctly
displayed under the following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out.

On the AC Adaptor

• Do not short-circuit the DC plug of the AC

Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.

To store the battery pack

If the battery pack is not in use for a while,
run down the battery and store it (p. 121).

Step 2: Charging the battery pack (Continued)

Summary of Contents for XDCAM PXW-X70





































































































































Search results

Summary of Contents for XDCAM PXW-X70

Reviews:

Related manuals for XDCAM PXW-X70

Brands by name

Popular brands

Sony XDCAM PXW-X70, Operating Manual

Search results

Summary of Contents for XDCAM PXW-X70

Reviews:

Related manuals for XDCAM PXW-X70

Brands by name

Popular brands