Sony XDCAM PDW-850, Operation Manual

Page: 176 / 280

Menu List 176
Ch
apt
er 6 Men
u
Dis
p
la
ys
a
nd Det
a
iled
S
e
ttin
gs
09 WRR
SETTING WRR VALID CH
SEL
f)
ALL /CH1 Selects whether to enable channels 1 and 2 of
the wireless receiver, or channel 1 only.
ALL: Enable both channel 1 and 2.
CH1: Enable channel 1 only. Select this
setting to use the wireless receiver as a
monaural receiver.
WRR CH SELECT
f) TX1 /TX2 Specifies the target channel for other items in
this menu.
TX1: Channel 1
TX2: Channel 2
WRR DELAY
COMP
f)
OFF/ ON Enables or disables the delay compensation
function for wireless audio input.
OFF: Disables the function.
ON: Enables the function (the audio in all EE
output is delayed by about 8 ms).
TX*
(*: channel number)
f)
– Displays the name of the transmitter whose
signals are being received on the channel
selected by WRR CH SELECT.
The channel number and name shown here are
recorded inside the <Description> tag in the
clip metadata file C*M01.XML (where * is
0001 to 9999).
TX* AUDIO PEAK
(*: channel number)
f)
--- /PEAK Displays whether the AF level of the
transmitter whose signals are being received
on the channel selected by WRR CH SELECT
is over the peak.
TX* INPUT LEVEL
(*: channel number)
f)
MIC/LINE Displays whether the input level of the
transmitter whose signals are being received
on the channel selected by WRR CH SELECT
is set to MIC or LINE.
TX* ATT LEVEL
(*: channel number)
f)
– Sets the ATT level of the transmitter whose
signals are being received on the channel
selected by WRR CH SELECT (the
permissible setting range may vary depending
on the transmitter device).
TX* LCF FREQ
(*: channel number)
f)
– Sets the Low Cut Filter frequency of the
transmitter whose signals are being received
on the channel selected by WRR CH SELECT
(the permissible setting range may vary
depending on the transmitter device).
TX* SYSTEM
DELAY
(*: channel number)
f)
AUTO /
0.0ms~8.0ms
Sets the amount of audio delay for the channel
selected by WRR CH SELECT.
AUTO: Automatically adjusts the amount of
delay so that the delay in the audio
received from the wireless receiver is
zero.
0.0ms~8.0ms: Sets the amount of anticipated
wireless system delay, for cases in
several wireless systems are being used
over a device such as an audio mixer.
No. Page Item Settings Description