![Sony Walkman NWZ-ZX1 Help Manual Download Page 249](http://html.mh-extra.com/html/sony/walkman-nwz-zx1/walkman-nwz-zx1_help-manual_413708249.webp)
WALKMAN
NWZ-ZX1
Your “WALKMAN” is not recognized by Media Go.
Your Walkman may not be recognized by the computer. Remove and then reconnect the USB cable.
The software may have failed to install correctly. Use the installer to re-install the software. The imported data will
remain untouched.
The USB connection may be off. Drag the status bar, tap [Turn on USB storage] in the notification panel and then
tap [Turn on USB storage] - [OK].
USB debugging may be enabled. Depending on the device and software, your Walkman may not be recognized
when USB debugging is enabled. Tap - [Settings] - [ Developer options] - [USB debugging] and remove the
checkmark.
If the remedies above do not solve the problem, press and hold the button for about 8 seconds or press the
RESET button with a pen or paper clip, etc. to reset your Walkman, and then connect again using USB.
Related Topic
Setting to automatically connect as USB storage
Troubleshooting
241