NW-WM1A/WM1Z
48
5-17-4. Copy log data (Copy log)
It can be copied log information recorded to NVP to the under root
directory of the WALKMAN main unit storage.
Note 1:
It can not operate in a state in which the WALKMAN main unit
was MSC connection.
Note 2:
It can not operate in a state in the log information absence.
Procedure:
1. Enter the test mode.
(Refer to “2. SETTING THE TEST MODE” on page 33)
2. Press the [+]/[–] keys to select the “Log”, and press the [
u
]
or [
>
] key to enter the minor item.
3. Press the [+]/[–] keys to select the “Copy log”.
4. Press the [
u
] key, the execution screen is displayed.
Log file copy
(LOG COPY command)
copy OK?
Screen display
5. Press the [
u
] key, copy is performed, and create the “log.
txt” to the under root directory of the WALKMAN main unit
storage
6. Slide the [HOLD] switch in the direction of on, to return to
minor item selection screen.
7. Refer to “5-16-4. Reboot (test mode release)”, and releasing
the test mode status.
8. Connect the WALKMAN main unit to PC (personal computer)
by the USB cable (WM-PORT).
USB cable
9. On PC (personal computer), open the WALKMAN main unit
storage for check of log information
fi
le (log.txt) presence.
Under root directory of
WALKMAN storage
10. Open the log information
fi
le (log.txt), check the log informa-
tion.
11. Disconnect the WALKMAN main unit from PC (personal
computer).
USB cable
